If you use Windows7 or Vista operating system, the system can switch HDMI Audio Codec on automatically once you plug in HDMI connector. If your OS is XP, please follow below steps: find Control Panel->Hardware and Audio->Manage Audio Device->Audio->choose NVIDIA HDMI Audio Codec
1. In the notification area next to your task bar, double-click the Safe Removal icon. Safe Removal displays a list of Plug and Play devices that support safe removal and that are currently attached to the system. If you do not see the Safe Removal icon, your device does not support safe removal, and you cannot unplug or eject your device using Safe Removal.
2. In Safely Remove Hardware, in the list of devices, select the device that you want to unplug or eject, and then click Stop. This tells the system that you will be unplugging or ejecting the device.
3. In Stop a Hardware device, click OK. A notification appears stating that it is now safe to unplug or eject the device. Unplugging or ejecting a device that supports safe removal without first using the Safe Removal application to warn the system can cause data to be lost or your system to become unstable. For example, if you use Safe Removal, however, you can warn the system before you unplug or eject a device, preventing possible loss of data. For removable storage devices that can safely be removed while the system is on, the system disables write caching by default. It does this so the devices can be removed without loss of data. When write caching is disabled, however, the system will likely experience slower performance, so be sure to enable write caching when you have finished removing the device.
Question: My computer says: “CMOS Battery Low”, what should I do?
Answer:
If your computer is without power (i.e. unplug the computer power source from the power outlet and remove the battery pack from it) for over 45 days, you would lose the information stored in CMOS. Please follow the steps below to reconfigure your CMOS settings:
1. Press F2 to enter into the BIOS setup utility.
2. Select “Load Optional Defaults?”. When you see the following prompt, choose and then press .
3. Select “Save Changes and Exit”, select and press to restart your computer.
Copyright @Gigabyte
-. Customers who purchase E150 can upgrade their players either
by Firmware updater or Iriver plus3
Please check your connection mode before updating New firm ware.
How do I check my connection mode?
**Menu-> Setting -> Advanced -> Connection mode
If your player ‘ s connection mode is MTP, please use Firmware updater to upgrade New Firmware.
If your player ‘ s connection mode is UMS, please use iriverplus3 to upgrade New Firmware.
** Upgraded Points **
-. Revise Fade-in error in playing specific file.
-. Revise display error of “Book Mark List” in pause.
Hello
Today I install Kaspersky Antivirus 6.0 for Workstation, Kaspersky Netagent 6.0 also and I get error:
Setup process error: 1607 (Unable to install InstallShield Scripting Runtime).
I found solution how to solve this problem from:
http://www.kaspersky.com/sp/faq?chapter=168839835&qid=169066620
But after following and check the same step with guide above from Kaspersky website and problem still the same
Now I found solution:
Kaspersky need “Everyone” group have Write permission on:
C:\Program Files\Common Files\InstallShield
After give permission now you can install kaspersky normal
Regards
The BIOS utility is a hardware configuration program built into your computer’s BIOS.
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run it.
To activate the BIOS utility, press <F2> during the POST; while the notebook PC logo is being displayed.
The new BIOS v1.08 enables the SATA disk to work like IDE.
http://support.acer-euro.com/drivers/notebook/ex_5210.html
Upgrade it under windows, then go to BIOS>Main>SATA Mode (change to IDE Mode)
Now you can instal WinXP.
NOTE : If you cannot click on the link , please copy it and paste to your browser address
Thanks and best regards !